Details on Xtreme Firmware v3.3 for TS-H943 Xbox 360
Have you ever heard something too good to be true, that for a moment your synapses ceased to function and left you having a nosebleed? Case in point, Commodore4eva’s Xtreme Firmware 3.3 for TS-H943‘s tagline, “World’s First Dual Speed, Media Stealth, One Firmware, Xbox 360 backup and extraction firmware modification!”
Just be aware that what follows the introduction has been proven to give people nosebleeds because of sheer delight. Version 3.2 had improved media speed patch, forced full speed on all media types while this time around it has Dual Read Speed mode (Quite/Slow Read mode for backups activated via any Xbox 360/Xbox 1 Original game disk.)
Technical details
————————
Default backup Read Speed is same as original game disks 12x. When Original Game disk is booted, all subsequent backup loading will be at Quiet/Slow Read mode, Original Game disks are unaffected. Turn console off/on to reset back to Default backup read speed (12x). Quiet/Slow Read Speed is for quiet operation and/or cheap DVD+R DL media.
Read more after the jump!
Have you ever heard something too good to be true, that for a moment your synapses ceased to function? Case in point, Commodore4eva’s Xtreme Firmware 3.3 for TS-H943‘s tagline, “World’s First Dual Speed, Media Stealth, One Firmware, Xbox 360 backup and extraction firmware modification!”
Just be aware that what follows the introduction has been proven to give people nosebleeds because of sheer delight. Version 3.2 had improved media speed patch, forced full speed on all media types while this time around it has Dual Read Speed mode (Quite/Slow Read mode for backups activated via any Xbox 360/Xbox 1 Original game disk.)
Technical details
————————
Default backup Read Speed is same as original game disks 12x. When Original Game disk is booted, all subsequent backup loading will be at Quiet/Slow Read mode, Original Game disks are unaffected. Turn console off/on to reset back to Default backup read speed (12x). Quiet/Slow Read Speed is for quiet operation and/or cheap DVD+R DL media.
Backups now automatically have pre-locked PSN range same as stated in extracted PFI sector if exists, or embeded PFI, therefore cannot read extracted SS/PFI/DMI sectors from disk. Currently all original 360 games have same PFI sector but maybe not in future, hence new feature of extracting PFI in Enable0800 mode and read from backup at PSN $4fb1d (Xbox 360) and $605fd (Xbox1) or if these sectors are blank embeded PFI will be used
Backups now support loading of DMI sector. This sector is different for every original 360 game but is currently not checked for, but maybe in future hence DMI can now be extracted also in Enable0800 mode and read from backup at PSN $4fb1e (Xbox 360) and $605fe (Xbox1)
Firmware checks for Enable0800 security sector @ PSN 04FB1F and if found, enables 0800 mode of firmware.
ISO image Enable0800.iso included. Just burn and insert into drive when you wish to extract security sectors or dump games.
0800 mode of firmware deactivated by inserting game backup (Xbox 360 or Xbox 1) or DVD movie or turning off console.
Reads Xbox 360/Xbox 1 security sector from PSN FD021E (Layer 1)
Reads Xbox 360 security sector from PSN 04FB1F (Layer 0)
Reads Xbox 1 security sector from PSN 605FF (Layer 0)
Security sector must be extracted using Enable0800 DVD for Xbox360 games and Xbox 1 games
Flashing your drive
—————————
For ms28 firmware versions of drive you will need to use the Vcc method or the VIA SATA 10 sec method to read/write flash. Refer to http://forums.xbox-scene.com/index.php?showtopic=535222
Advisable to make a backup of your dvd drive firmware first.(“mtkflash r /m orig.bin”)
In Windows, copy orig.bin to same directory as this release (same directory as xtreme33.bin and X360SAM.exe)
Double click “Make X33.bin” to create x33.bin (Xtreme33 firmware with your key from orig.bin). Thanks to eXOBeX for X360SAM.EXE
Copy x33.bin to boot disk
Power off PC
Plug SATA cable from DVD drive to PC. Power cable drive still connected to Xbox 360
Power on Xbox 360
Power on PC
Boot with standard dos boot disk with included mtkflash utility
Run “mtkflash w /m x33.bin”
Extracting Security Sector
—————————————
Ensue SATA cable is plugged from drive to PC.
(This is very important as may be possible in future for console to detect modified firmware due to Inquiry routine enabled for Windows)
Power on Xbox 360.
Insert Enable0800 DVD into drive. Wait 5 or so seconds then remove the Enable0800 DVD. Drive now in 0800 mode.
Turn on PC and wait for Windows to boot
Insert original game disk into drive and wait for windows to detect disk change
Run DVDinfoPro
Enter the following four custom cdb commands:
AD 00 FF 02 FD FF FE 00 08 00 01 C0
AD 00 FF 02 FD FF FE 00 08 00 03 C0
AD 00 FF 02 FD FF FE 00 08 00 05 C0
AD 00 FF 02 FD FF FE 00 08 00 07 C0
Then save hexadecimal display as bin file as SS.bin
Extracting PFI (Physical Format Information) Sector
——————————————————————-
Run DVDinfoPro
From Advanced Commands pull down menu choose Send Custom Command
From Preset Commands pull down menu choose “00h Physical Format Information” from under the Read DVD Struct Commands heading
Click Send
Then save hexadecimal display as bin file as PFI.bin
Extracting DMI (Disk Manufacturing Information) Sector
——————————————————————-
Run DVDinfoPro
From Advanced Commands pull down menu choose “04h Disc Manufacturing Info”
Click OK on Read DVD Structure Option window
Then save hexadecimal display as bin file as DMI.bin
Creating a game backup
———————————–
Drive is still in 0800 mode.
Extract Isobuilder.rar
Insert original game disk into drive and wait for windows to detect disk change
Run DVDinfoPro
Enter the following custom cdb command to unlock drive: (game data visable)
FF 08 01 01
Run Isobuster
Right click on DVD and select Extract From-To
Click Length and enter number of LBAs as follows:
Xbox 1 Original Number of LBA to read 3431264 decimal
or
Xbox 360 Original Number of LBA to read 3567872 decimal
Select User Data (2048 bytes/block)
Click Start Extraction
Enter filename as game.iso and click Save
Upon read error dialogue box choose fill with blank zeros for sector and select use this selection for all errors
Copy game.iso, ss.bin, PFI.bin and DMI.bin to the relevent isobuilder directory (Depending on Xbox 360 or Xbox 1 game)
Run build360.bat (Xbox 360 game) or build.bat (xbox 1 game).
These batch files now expect PFI and DMI bin files
Burn with CloneCd and choose the image.dvd file
Turning off 0800 mode of firmware
————————————————
Either insert game backup (Xbox 360 or Xbox 1) or DVD movie. This de-activates 0800 part of firmware or turn off console.
Via xboxhacker
About The Author
