PRX Loader for 2.71 SE *UPDATE*

PRX Loader for 2.71 SE

kingofalleet tells us that Eiffel56 announced the PRX Loader for 2.71 SE over at the German Portable News forums. Now because of the intricacies of translation from German to English by weblator, we can’t tell if this was from before or after he bricked his PSP from before (for no apparent reason). Well, if it’s after, not only do we feel happy that he now has a running PSP again, but that “I tested the whole extensively, before I mean PSP gebricked have. And it functioned marvelously.”

Still, as with all homebrew-that-loves-to-flash in life, “NO warranty, it uses nevertheless on OWN DANGER!!!” (And from the Readme) “AT THIS POINT, WE WRITE TO FLASH0!! USE AT YOUR OWN RISK, IT COULD B R I C K YOUR PSP!” Gott in himmel. Gott schützen unser PSPs.

Caveat emptor: Eiffel56’s “Nose list” – we think he means “bugs.” You know, like weblators are so buggy.

  • Those config is sometimes not accepted. That config parsing module is something Buggy. Take best config from the VSH the Extender and change according to desire.
  • Not all PRXe functioning. I successfully tested VSH Extender and AIOMOD2 at that time.

More details from Eiffel56’s forum post in the original German at the Via link. Let’s hope your weblator’s better than ours. Thanks kingofalleet!

Download: [PRX Loader for 2.71 SE]


UPDATE: We just love the QJ readers…always ready to help their fellow PSP users. Niklas Kunkel (thanks a bunch!!!) has just sent in a much, much better translation of what Eiffel56 has to say about his PRX Loader. According to Niklas’ translation, this app has been tested by Eiffel56 before his PSP got bricked.

Also translated was the installation instruction, which I’m sure most of you have been wanting to know about. And Niklas translates:

  1. Extract the folders MS_ROOT to your memory stick.
  2. If you start your 1.50 homebrews out of GAME150 you have to change it!
  3. After this you just start the installer.
  4. Make sure your battery is full enough, and attach the AC cable.
  5. The installation is fast and easy.
  6. The installer can unflash the whole thing.

By the way, the “Nose list”, which we first thought was a bugs list, was actually instructions on how to use PRX Loader. And the instructions are as follows:

  • First you have to configure the whole thing. This is just like in the custom firmware. ThatÂ’s why I use Dark_AlexÂ’s.config parsing Routing.
  • For best test results take the VSH Extender for the custom firmware. There is a config file with it and this config file must be in /PSP/SYSTEM.
  • When its done, go to your network update icon. This is from now on your PRX Loader! Wait for a second and your PRX will be loaded!

There you have it. Hope that helped. And Niklas…you are heaven sent! =)

PRX Loader for 2.71 SE

kingofalleet tells us that Eiffel56 announced the PRX Loader for 2.71 SE over at the German Portable News forums. Now because of the intricacies of translation from German to English by weblator, we can’t tell if this was from before or after he bricked his PSP from before (for no apparent reason). Well, if it’s after, not only do we feel happy that he now has a running PSP again, but that “I tested the whole extensively, before I mean PSP gebricked have. And it functioned marvelously.”

Still, as with all homebrew-that-loves-to-flash in life, “NO warranty, it uses nevertheless on OWN DANGER!!!” (And from the Readme) “AT THIS POINT, WE WRITE TO FLASH0!! USE AT YOUR OWN RISK, IT COULD B R I C K YOUR PSP!” Gott in himmel. Gott schützen unser PSPs.

Caveat emptor: Eiffel56’s “Nose list” – we think he means “bugs.” You know, like weblators are so buggy.

  • Those config is sometimes not accepted. That config parsing module is something Buggy. Take best config from the VSH the Extender and change according to desire.
  • Not all PRXe functioning. I successfully tested VSH Extender and AIOMOD2 at that time.

More details from Eiffel56’s forum post in the original German at the Via link. Let’s hope your weblator’s better than ours. Thanks kingofalleet!

Download: [PRX Loader for 2.71 SE]


UPDATE: We just love the QJ readers…always ready to help their fellow PSP users. Niklas Kunkel (thanks a bunch!!!) has just sent in a much, much better translation of what Eiffel56 has to say about his PRX Loader. According to Niklas’ translation, this app has been tested by Eiffel56 before his PSP got bricked.

Also translated was the installation instruction, which I’m sure most of you have been wanting to know about. And Niklas translates:

  1. Extract the folders MS_ROOT to your memory stick.
  2. If you start your 1.50 homebrews out of GAME150 you have to change it!
  3. After this you just start the installer.
  4. Make sure your battery is full enough, and attach the AC cable.
  5. The installation is fast and easy.
  6. The installer can unflash the whole thing.

By the way, the “Nose list”, which we first thought was a bugs list, was actually instructions on how to use PRX Loader. And the instructions are as follows:

  • First you have to configure the whole thing. This is just like in the custom firmware. ThatÂ’s why I use Dark_AlexÂ’s.config parsing Routing.
  • For best test results take the VSH Extender for the custom firmware. There is a config file with it and this config file must be in /PSP/SYSTEM.
  • When its done, go to your network update icon. This is from now on your PRX Loader! Wait for a second and your PRX will be loaded!

There you have it. Hope that helped. And Niklas…you are heaven sent! =)

Add a Comment

Your email address will not be published. Required fields are marked *