A Simple Memory stick PRO Duo Mod
In the mood for a memory stick pro duo mod? We were informed by Henry Eng (thanks for that!) about a memory stick PRO Duo mod that will allow you to use the Memory Stick PRO Duo on card readers that requires an adapter. This will be helpful if you lost your adapter or don’t have or can’t afford one. But before we go down to the nitty-gritty of things, you should know that you will take full responsibility if anything happens to your Memory Stick. So with that aptly stated, off we go to the procedures.
- Cut off about 5 inches of scotch tape.
- Tape one end, about half an inch, of the scotch tape on to the end of the Memory Stick PRO Duo.
- Place the paperclip end to end with the Memory Stick PRO Duo on the tape.
- Bring the remaining tape around the clip and tape it on the other side of the memory stick PRO Duo.
- Take about 1 inch of tape and secure around the memory stick PRO Duo and the paperclip.
- Use the paperclip and push the memory stick in, make sure it is align with the slot.
Just a few reminders:
- It might get stuck if you don’t tape it right.
- It might crack and break your memory card, a slim chance but there is the risk.
- It will not work with cameras or any other device that requires a Memory Stick PRO.
Feel free to click on the thumbnails below for the pictures of the step-by-step procedures.
Via Wikihow
In the mood for a memory stick pro duo mod? We were informed by Henry Eng (thanks for that!) about a memory stick PRO Duo mod that will allow you to use the Memory Stick PRO Duo on card readers that requires an adapter. This will be helpful if you lost your adapter or don’t have or can’t afford one. But before we go down to the nitty-gritty of things, you should know that you will take full responsibility if anything happens to your Memory Stick. So with that aptly stated, off we go to the procedures.
- Cut off about 5 inches of scotch tape.
- Tape one end, about half an inch, of the scotch tape on to the end of the Memory Stick PRO Duo.
- Place the paperclip end to end with the Memory Stick PRO Duo on the tape.
- Bring the remaining tape around the clip and tape it on the other side of the memory stick PRO Duo.
- Take about 1 inch of tape and secure around the memory stick PRO Duo and the paperclip.
- Use the paperclip and push the memory stick in, make sure it is align with the slot.
Just a few reminders:
- It might get stuck if you don’t tape it right.
- It might crack and break your memory card, a slim chance but there is the risk.
- It will not work with cameras or any other device that requires a Memory Stick PRO.
Feel free to click on the thumbnails below for the pictures of the step-by-step procedures.
Via Wikihow