Connect to Your PSP Via TelNet And Type Text to Your PSP Screen!
Thats right, PspPet at PS2dev forums has put togeather this app. Follow the instructions in the readme. This program will let you connect to your PSP with your PC via telnet and you can type text that will show up on your PSP!
- 1) configure the “Network Settings” for “Infrastructure Mode”
There must be one configuration
(multiple configuration selection not implemented)
Do not use “DHCP”
(otherwise the Connecting status will stop at 00000003)- 2) Be sure you can connect to that WiFi net using your PC
- 3) run the program on the PSP (both 1.0 and 1.50 versions available)
- 4) wait for the telnet instructions
- 5) on the PC, connect to the PSP using telnet
- 6) type in up to 255 characters and see them on the PSP screen
- 7) if you get bored, disconnect from telnet and the app will exit
- 8) on exit, see file “err.txt” on the memory stick for error logging
- Very primitive, but a start
You can get this file in our PSP Download section [here]
Thats right, PspPet at PS2dev forums has put togeather this app. Follow the instructions in the readme. This program will let you connect to your PSP with your PC via telnet and you can type text that will show up on your PSP!
- 1) configure the “Network Settings” for “Infrastructure Mode”
There must be one configuration
(multiple configuration selection not implemented)
Do not use “DHCP”
(otherwise the Connecting status will stop at 00000003)- 2) Be sure you can connect to that WiFi net using your PC
- 3) run the program on the PSP (both 1.0 and 1.50 versions available)
- 4) wait for the telnet instructions
- 5) on the PC, connect to the PSP using telnet
- 6) type in up to 255 characters and see them on the PSP screen
- 7) if you get bored, disconnect from telnet and the app will exit
- 8) on exit, see file “err.txt” on the memory stick for error logging
- Very primitive, but a start
You can get this file in our PSP Download section [here]