WiFi Controller v0.3 for PSP Released

psp

The Wifi Controller turns the PSP into a controller for PC (Windows). When the WiFi Controller program is launched it will establish a wireless network connection. As soon as a connection is established it obtains an IP address that will connect to a server running on your PC. Once it has connected to a PC, the PSP will act just like a regular joystick.

Developed by David Rudie, the WiFi Controller was inspired by an earlier program called PPjoy written by Mikko Monroe. PPJoy had a few kinks and David wanted a more detailed application, so he wrote WiFi Controller from scratch and used a small portion of PPJoy codes. David thanks Mikko for that.

If you already have David’s app, he just released the latest update WiFi Controller v0.3 and here’s the changelog:

Cleaned up and added more detailed instructions
Fixed up on-screen display some
Added some more detailed battery information
Cleaned up the connection code some
Moved some text strings to a new file
Cleaned up code overall

David’s To-Do list includes:

Finish Apple Mac OS X driver support
Add WiFi connection selection
Add AdHoc mode
Add Greater sleep support and maybe automatically re-establish the wireless connection
Add support for using a combination of buttons to act as one separate button
Volume up and down mappable for v1.0 and v1.5 and a separate version without these buttons for v2.x
Check why people get disconnected after so-and-so minutes.

Download: [WiFi Controller v0.3 for PSP]

Check out the installation procedure after the jump!

psp

If you already have David’s app, he just released the latest update WiFi Controller v0.3 and here’s the changelog:

Cleaned up and added more detailed instructions
Fixed up on-screen display some
Added some more detailed battery information
Cleaned up the connection code some
Moved some text strings to a new file
Cleaned up code overall

David’s To-Do list includes:

Finish Apple Mac OS X driver support
Add WiFi connection selection
Add AdHoc mode
Add Greater sleep support and maybe automatically re-establish the wireless connection
Add support for using a combination of buttons to act as one separate button
Volume up and down mappable for v1.0 and v1.5 and a separate version without these buttons for v2.x
Check why people get disconnected after so-and-so minutes.

If this is all new to you please read on before you download and install it. To load users, you may still want to check out the installation process as there quite a few changes from the previous release:

WiFi Controller v0.3 uses the first infrastructure connection in your network connection list. David said he wrote the program for v1.00 and v1.50 but unconfirmed reports have it that it works for v2.60. But that’s unconfirmed.

Installation:
“These steps are all necessary and you should pay close attention to them,” says David.

1. Open the PSP directory and edit the proper wifi.cfg for your PSP version and set the IP of the computer you are going to use this on. If you don’t know your IP address. Go to your “Start” menu. Click on “Run…” When the box opens up type “cmd.exe” without the quotes. When the command prompt opens type “ipconfig” without the quotes. It will report your IP address.

2. Copy the correct director(y|ies) to your PSP depending on whether you have a v1.00 or v1.50 PSP. If you use a custom firmware mod that allows the use of a single EBOOT.PBP files on a v1.50 PSP then you can use the v1.00 directory.

3. Download and install PPJoy.

4. After it is installed open up your “Control Panel” and click on “Parallel Port Joysticks“.

5. When the window comes up click “Add…” at the bottom. On the next screen change “Parallel port” to “Virtual joysticks”and then click “Add.”

6. It will want to install some drivers so either have it scan automatically or point it to the directory you installed PPJoy to.

7. After it is done installing, click the “PPJoy Virtual joystick 1” in the menu and click “Mapping…”

8. Choose “Set a custom mapping for this controller” and click “Next.”

9. Set these options for best results.

Axes = 2 (X Axis and Y Axis)
Buttons = 9
POV hats = 1

10. X Axis = Analog 0
Y Axis = Analog 1

11. These buttons are up to you to set. You should leave “Button 1” set to “nothing” otherwise you may have problems using the Triangle button on your PSP later.

Button 1 = nothing
Button 2 = Digital 0
Button 3 = Digital 1
Button 4 = Digital 2
Button 5 = Digital 3
Button 6 = Digital 4
Button 7 = Digital 5
Button 8 = Digital 11
Button 9 = Digital 10

12. Directional button POV

North = Digital 6
East = Digital 7
West = Digital 9
South = Digital 8

13. Run the SocketText.exe program. It will open a Command Prompt window. Just minimize it. You need to have SocketText.exe running at all times in order to use the PSP as a joystick. When you are done using it you can safely exit the program. If the window opens and closes then something went wrong beyond my control. All I can say is retry all the steps. Read PPJoy’s website as well for help in getting that setup because that is most likely where the problem lies.

14. Now start the program on your PSP and it should connect to your computer and basically be working. You’ll find out in the next step.

15. Go back to your Control Panel and go to Game Controllers. Click on “PPJoy Virtual joystick 1” and choose Properties. On the screen that comes up you should be able to press buttons on the PSP and have them show as working on the screen. I recommend calibrating the Analog Stick too.

16. Enjoy!

Download: [WiFi Controller v0.3 for PSP]

Via David Rudie

Related Posts

Add a Comment